NAUTEL-V1X2-STANDALONE-OR-SLAVE-NXLINK-MIB DEFINITIONS ::= BEGIN

IMPORTS
  OBJECT-TYPE     FROM RFC-1212
  TRAP-TYPE       FROM RFC-1215
  nxlink          FROM NAUTEL-NXLINK-MIB
;

EnumTrueFalse ::= INTEGER
{
  false (0), true (1)
}

EnumIncreaseDecrease ::= INTEGER
{
  decrease (0), increase (1)
}

EnumV1x2StandaloneorSlaveIncontactwithequipment ::= INTEGER
{
  no (0), yes (1)
}

EnumV1x2StandaloneorSlaveSystemControl ::= INTEGER
{
  local (0), remote (1)
}

EnumV1x2StandaloneorSlaveRFPower ::= INTEGER
{
  off (0), on (1)
}

EnumV1x2StandaloneorSlaveRFOk ::= INTEGER
{
  yes (0), no (1)
}

EnumV1x2StandaloneorSlaveCombinerStatus ::= INTEGER
{
  standalone (0), sc1 (1), slave (2), master (3)
}

EnumV1x2StandaloneorSlaveActivePresetMode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePresetModes ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset1Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset2Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset3Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset4Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset5Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

EnumV1x2StandaloneorSlavePreset6Mode ::= INTEGER
{
  fm (0), fmalc (1), hd (2), fmplushd (3)
}

--
-- Nx Device Table
--

NxLinkV1x2StandaloneorSlaveEntry ::= SEQUENCE
{
  nxlinkV1x2StandaloneorSlaveTableIndex                INTEGER,
  nxlinkV1x2StandaloneorSlaveDeviceId                  EnumDeviceId,
  nxlinkV1x2StandaloneorSlaveDeviceType                OCTET STRING,
  nxlinkV1x2StandaloneorSlaveDeviceDescription         OCTET STRING,
  nxlinkV1x2StandaloneorSlaveFirmwareVersion           OCTET STRING,
  nxlinkV1x2StandaloneorSlaveFirmwareDate              OCTET STRING,
  nxlinkV1x2StandaloneorSlaveManufacturer              OCTET STRING,
  nxlinkV1x2StandaloneorSlaveIncontactwithequipment          EnumV1x2StandaloneorSlaveIncontactwithequipment,
  nxlinkV1x2StandaloneorSlaveSystemControl          EnumV1x2StandaloneorSlaveSystemControl,
  nxlinkV1x2StandaloneorSlaveRFPower          EnumV1x2StandaloneorSlaveRFPower,
  nxlinkV1x2StandaloneorSlaveRFOk          EnumV1x2StandaloneorSlaveRFOk,
  nxlinkV1x2StandaloneorSlaveActivePreset          INTEGER,
  nxlinkV1x2StandaloneorSlaveCombinerStatus          EnumV1x2StandaloneorSlaveCombinerStatus,
  nxlinkV1x2StandaloneorSlaveActivePresetMode          EnumV1x2StandaloneorSlaveActivePresetMode,
  nxlinkV1x2StandaloneorSlaveActivePresetFrequency          INTEGER,
  nxlinkV1x2StandaloneorSlaveActivePresetRFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePresetModes          EnumV1x2StandaloneorSlavePresetModes,
  nxlinkV1x2StandaloneorSlavePreset1Mode          EnumV1x2StandaloneorSlavePreset1Mode,
  nxlinkV1x2StandaloneorSlavePreset2Mode          EnumV1x2StandaloneorSlavePreset2Mode,
  nxlinkV1x2StandaloneorSlavePreset3Mode          EnumV1x2StandaloneorSlavePreset3Mode,
  nxlinkV1x2StandaloneorSlavePreset4Mode          EnumV1x2StandaloneorSlavePreset4Mode,
  nxlinkV1x2StandaloneorSlavePreset5Mode          EnumV1x2StandaloneorSlavePreset5Mode,
  nxlinkV1x2StandaloneorSlavePreset6Mode          EnumV1x2StandaloneorSlavePreset6Mode,
  nxlinkV1x2StandaloneorSlavePreset1Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset2Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset3Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset4Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset5Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset6Frequency          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset1RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset2RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset3RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset4RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset5RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlavePreset6RFPower          INTEGER,
  nxlinkV1x2StandaloneorSlaveActiveFaults          INTEGER,
  nxlinkV1x2StandaloneorSlaveSWRShutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveInterlockOpen          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveLowACAlarm          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePSTemperatureAlarm          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePSFailure          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveBatteryBackupLow          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveAlarm06          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSlaveCommunicationFailure          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveRFDriveHigh          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveRFDriveLow          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveHDReversePathFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveModeFrequencyMismatch          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCompatibilityFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveExciterAutoChangeover          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCombinerRejectShutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCheckOtherTransmitter          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveEEPROMFailPowerPresets          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveEEPROMFailMeterCalibration          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveEEPROMFailThresholds          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveEEPROMFailMeterPresets          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveForwardPowerLimiting          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSWRFoldback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveLowForwardPower          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveRejectTemperatureHigh          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ1Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ2Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ3Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ4Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveHighForwardPower          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveHighReflectedPower          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveExciterCommunicationsFailed          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSWRShutdown          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveHighTemperatureLatch          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveExciterFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCheckExciter          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveForwardPowerShutdown          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePlus15VSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveMinus15VSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePlus24VSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePlus5VSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel1          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel2          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel3          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel4          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel5          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel6          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCutbackLevel7          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveAlarm57          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ1Disabled          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ2Disabled          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ3Disabled          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveQ4Disabled          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveMasterCommunciationFailure          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePlus12VSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCombinerDCSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCombinerFanSupplyFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePAFanAFail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePAFanBFail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCombinerFan1Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveCombinerFan2Fail          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSystemRejectTemperatureHigh          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveOtherTransmitterFault          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSystemShutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSC1Shutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveAlarm80          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveAlarm81          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveAlarm82          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveHighPADissipation          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveSystemForwardPowerLow          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveExtendedRfLoss          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveIntakeTemperatureHigh          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveExhaustTemperatureHigh          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledShutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledTiming          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledPower          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledSystem          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledShutback          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledTiming          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledPower          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledSystem          EnumTrueFalse,
  nxlinkV1x2StandaloneorSlavePowerMeters          EnumIncreaseDecrease,
  nxlinkV1x2StandaloneorSlaveForwardPower          INTEGER,
  nxlinkV1x2StandaloneorSlaveReflectedPower          INTEGER,
  nxlinkV1x2StandaloneorSlaveRFDrive          INTEGER,
  nxlinkV1x2StandaloneorSlavePAVDC          INTEGER,
  nxlinkV1x2StandaloneorSlaveTotalPACurrent          INTEGER,
  nxlinkV1x2StandaloneorSlaveEfficiencyDCtoRF          INTEGER,
  nxlinkV1x2StandaloneorSlaveVSWR          INTEGER,
  nxlinkV1x2StandaloneorSlaveControllerTemperature          INTEGER,
  nxlinkV1x2StandaloneorSlaveRejectLoadTemperature          INTEGER,
  nxlinkV1x2StandaloneorSlaveIntakeTemperature          INTEGER,
  nxlinkV1x2StandaloneorSlaveExhaustTemperature          INTEGER,
  nxlinkV1x2StandaloneorSlavePAFanASpeed          INTEGER,
  nxlinkV1x2StandaloneorSlavePAFanBSpeed          INTEGER,
  nxlinkV1x2StandaloneorSlaveTemperatureRise          INTEGER,
  nxlinkV1x2StandaloneorSlavePlus5V          INTEGER,
  nxlinkV1x2StandaloneorSlavePlus15V          INTEGER,
  nxlinkV1x2StandaloneorSlaveMinus15V          INTEGER,
  nxlinkV1x2StandaloneorSlavePlus24V          INTEGER,
  nxlinkV1x2StandaloneorSlavePlus12V          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ1Current          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ2Current          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ3Current          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ4Current          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ1Bias          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ2Bias          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ3Bias          INTEGER,
  nxlinkV1x2StandaloneorSlaveQ4Bias          INTEGER
}

nxlinkV1x2StandaloneorSlaveTable OBJECT-TYPE
  SYNTAX SEQUENCE OF NxLinkV1x2StandaloneorSlaveEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
  "Table for V1x2 (Standalone or Slave) devices"
  ::= {nxlink 8200 }

nxlinkV1x2StandaloneorSlaveEntry OBJECT-TYPE
  SYNTAX NxLinkV1x2StandaloneorSlaveEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) device entry in the V1x2 (Standalone or Slave) table"
  INDEX { nxlinkV1x2StandaloneorSlaveTableIndex }
  ::= { nxlinkV1x2StandaloneorSlaveTable 1 }

nxlinkV1x2StandaloneorSlaveTableIndex OBJECT-TYPE
  SYNTAX INTEGER (1..7)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Index value of V1x2 (Standalone or Slave) device:
  1 = Primary Device
  2-7 = Sub-devices"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 1 }

nxlinkV1x2StandaloneorSlaveDeviceId OBJECT-TYPE
  SYNTAX EnumDeviceId
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device identifier"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 2 }

nxlinkV1x2StandaloneorSlaveDeviceType OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device type"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 3 }

nxlinkV1x2StandaloneorSlaveDeviceDescription OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device description"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 4 }

nxlinkV1x2StandaloneorSlaveFirmwareVersion OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Firmware version"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 5 }

nxlinkV1x2StandaloneorSlaveFirmwareDate OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Firmware date"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 6 }

nxlinkV1x2StandaloneorSlaveManufacturer OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Manufacturer"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 7 }

nxlinkV1x2StandaloneorSlaveIncontactwithequipment OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveIncontactwithequipment
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) In contact with equipment"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 8 }

nxlinkV1x2StandaloneorSlaveSystemControl OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveSystemControl
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) System Control"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 9 }

nxlinkV1x2StandaloneorSlaveRFPower OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveRFPower
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) RF Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 10 }

nxlinkV1x2StandaloneorSlaveRFOk OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveRFOk
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) RF Ok"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 11 }

nxlinkV1x2StandaloneorSlaveActivePreset OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Active Preset "
  ::= { nxlinkV1x2StandaloneorSlaveEntry 12 }

nxlinkV1x2StandaloneorSlaveCombinerStatus OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveCombinerStatus
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner Status"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 13 }

nxlinkV1x2StandaloneorSlaveActivePresetMode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlaveActivePresetMode
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Active Preset Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 15 }

nxlinkV1x2StandaloneorSlaveActivePresetFrequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Active Preset Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 16 }

nxlinkV1x2StandaloneorSlaveActivePresetRFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Active Preset RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 17 }

nxlinkV1x2StandaloneorSlavePresetModes OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePresetModes
  MAX-ACCESS write-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset Modes"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 18 }

nxlinkV1x2StandaloneorSlavePreset1Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset1Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 1 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 19 }

nxlinkV1x2StandaloneorSlavePreset2Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset2Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 2 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 20 }

nxlinkV1x2StandaloneorSlavePreset3Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset3Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 3 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 21 }

nxlinkV1x2StandaloneorSlavePreset4Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset4Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 4 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 22 }

nxlinkV1x2StandaloneorSlavePreset5Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset5Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 5 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 23 }

nxlinkV1x2StandaloneorSlavePreset6Mode OBJECT-TYPE
  SYNTAX EnumV1x2StandaloneorSlavePreset6Mode
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 6 Mode"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 24 }

nxlinkV1x2StandaloneorSlavePreset1Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 1 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 26 }

nxlinkV1x2StandaloneorSlavePreset2Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 2 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 27 }

nxlinkV1x2StandaloneorSlavePreset3Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 3 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 28 }

nxlinkV1x2StandaloneorSlavePreset4Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 4 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 29 }

nxlinkV1x2StandaloneorSlavePreset5Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 5 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 30 }

nxlinkV1x2StandaloneorSlavePreset6Frequency OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 6 Frequency (0.01 MHz)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 31 }

nxlinkV1x2StandaloneorSlavePreset1RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 1 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 33 }

nxlinkV1x2StandaloneorSlavePreset2RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 2 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 34 }

nxlinkV1x2StandaloneorSlavePreset3RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 3 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 35 }

nxlinkV1x2StandaloneorSlavePreset4RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 4 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 36 }

nxlinkV1x2StandaloneorSlavePreset5RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 5 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 37 }

nxlinkV1x2StandaloneorSlavePreset6RFPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Preset 6 RF Power (0.001 kW)"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 38 }

nxlinkV1x2StandaloneorSlaveActiveFaults OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS write-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Active Faults"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 45 }

nxlinkV1x2StandaloneorSlaveSWRShutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) SWR Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 46 }

nxlinkV1x2StandaloneorSlaveInterlockOpen OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Interlock Open"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 47 }

nxlinkV1x2StandaloneorSlaveLowACAlarm OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Low AC Alarm"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 48 }

nxlinkV1x2StandaloneorSlavePSTemperatureAlarm OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PS Temperature Alarm"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 49 }

nxlinkV1x2StandaloneorSlavePSFailure OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PS Failure"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 50 }

nxlinkV1x2StandaloneorSlaveBatteryBackupLow OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Battery Backup Low"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 51 }

nxlinkV1x2StandaloneorSlaveAlarm06 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Alarm 0_6"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 52 }

nxlinkV1x2StandaloneorSlaveSlaveCommunicationFailure OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Slave Communication Failure"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 53 }

nxlinkV1x2StandaloneorSlaveRFDriveHigh OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) RF Drive High"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 54 }

nxlinkV1x2StandaloneorSlaveRFDriveLow OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) RF Drive Low"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 55 }

nxlinkV1x2StandaloneorSlaveHDReversePathFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) HD Reverse Path Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 56 }

nxlinkV1x2StandaloneorSlaveModeFrequencyMismatch OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Mode/Frequency Mismatch"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 57 }

nxlinkV1x2StandaloneorSlaveCompatibilityFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Compatibility Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 58 }

nxlinkV1x2StandaloneorSlaveExciterAutoChangeover OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Exciter Auto Changeover"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 59 }

nxlinkV1x2StandaloneorSlaveCombinerRejectShutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner Reject Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 60 }

nxlinkV1x2StandaloneorSlaveCheckOtherTransmitter OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Check Other Transmitter"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 61 }

nxlinkV1x2StandaloneorSlaveEEPROMFailPowerPresets OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) EEPROM Fail: Power Presets"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 62 }

nxlinkV1x2StandaloneorSlaveEEPROMFailMeterCalibration OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) EEPROM Fail: Meter Calibration"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 63 }

nxlinkV1x2StandaloneorSlaveEEPROMFailThresholds OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) EEPROM Fail: Thresholds"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 64 }

nxlinkV1x2StandaloneorSlaveEEPROMFailMeterPresets OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) EEPROM Fail: Meter Presets"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 65 }

nxlinkV1x2StandaloneorSlaveForwardPowerLimiting OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Forward Power Limiting"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 66 }

nxlinkV1x2StandaloneorSlaveSWRFoldback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) SWR Foldback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 67 }

nxlinkV1x2StandaloneorSlaveLowForwardPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Low Forward Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 68 }

nxlinkV1x2StandaloneorSlaveRejectTemperatureHigh OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Reject Temperature  High"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 69 }

nxlinkV1x2StandaloneorSlaveQ1Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q1 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 70 }

nxlinkV1x2StandaloneorSlaveQ2Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q2 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 71 }

nxlinkV1x2StandaloneorSlaveQ3Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q3 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 72 }

nxlinkV1x2StandaloneorSlaveQ4Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q4 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 73 }

nxlinkV1x2StandaloneorSlaveHighForwardPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) High Forward Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 74 }

nxlinkV1x2StandaloneorSlaveHighReflectedPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) High Reflected Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 75 }

nxlinkV1x2StandaloneorSlaveExciterCommunicationsFailed OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Exciter Communications Failed"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 76 }

nxlinkV1x2StandaloneorSlaveSWRShutdown OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) SWR Shutdown"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 77 }

nxlinkV1x2StandaloneorSlaveHighTemperatureLatch OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) High Temperature Latch"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 78 }

nxlinkV1x2StandaloneorSlaveExciterFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Exciter Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 79 }

nxlinkV1x2StandaloneorSlaveCheckExciter OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Check Exciter"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 80 }

nxlinkV1x2StandaloneorSlaveForwardPowerShutdown OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Forward Power Shutdown"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 81 }

nxlinkV1x2StandaloneorSlavePlus15VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +15V Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 82 }

nxlinkV1x2StandaloneorSlaveMinus15VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) -15V Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 83 }

nxlinkV1x2StandaloneorSlavePlus24VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +24V Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 84 }

nxlinkV1x2StandaloneorSlavePlus5VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +5V Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 85 }

nxlinkV1x2StandaloneorSlaveCutbackLevel1 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 1"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 86 }

nxlinkV1x2StandaloneorSlaveCutbackLevel2 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 2"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 87 }

nxlinkV1x2StandaloneorSlaveCutbackLevel3 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 3"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 88 }

nxlinkV1x2StandaloneorSlaveCutbackLevel4 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 4"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 89 }

nxlinkV1x2StandaloneorSlaveCutbackLevel5 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 5"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 90 }

nxlinkV1x2StandaloneorSlaveCutbackLevel6 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 6"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 91 }

nxlinkV1x2StandaloneorSlaveCutbackLevel7 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Cutback Level 7"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 92 }

nxlinkV1x2StandaloneorSlaveAlarm57 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Alarm 5_7"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 93 }

nxlinkV1x2StandaloneorSlaveQ1Disabled OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q1 Disabled"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 94 }

nxlinkV1x2StandaloneorSlaveQ2Disabled OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q2 Disabled"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 95 }

nxlinkV1x2StandaloneorSlaveQ3Disabled OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q3 Disabled"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 96 }

nxlinkV1x2StandaloneorSlaveQ4Disabled OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q4 Disabled"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 97 }

nxlinkV1x2StandaloneorSlaveMasterCommunciationFailure OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Master Communciation Failure"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 98 }

nxlinkV1x2StandaloneorSlavePlus12VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +12V Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 99 }

nxlinkV1x2StandaloneorSlaveCombinerDCSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner DC Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 100 }

nxlinkV1x2StandaloneorSlaveCombinerFanSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner Fan Supply Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 101 }

nxlinkV1x2StandaloneorSlavePAFanAFail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PA Fan A Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 102 }

nxlinkV1x2StandaloneorSlavePAFanBFail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PA Fan B Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 103 }

nxlinkV1x2StandaloneorSlaveCombinerFan1Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner Fan 1 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 104 }

nxlinkV1x2StandaloneorSlaveCombinerFan2Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Combiner Fan 2 Fail"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 105 }

nxlinkV1x2StandaloneorSlaveSystemRejectTemperatureHigh OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) System Reject Temperature High"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 106 }

nxlinkV1x2StandaloneorSlaveOtherTransmitterFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Other Transmitter Fault"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 107 }

nxlinkV1x2StandaloneorSlaveSystemShutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) System Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 108 }

nxlinkV1x2StandaloneorSlaveSC1Shutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) SC1 Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 109 }

nxlinkV1x2StandaloneorSlaveAlarm80 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Alarm 8 0"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 110 }

nxlinkV1x2StandaloneorSlaveAlarm81 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Alarm 8 1"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 111 }

nxlinkV1x2StandaloneorSlaveAlarm82 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Alarm 8 2"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 112 }

nxlinkV1x2StandaloneorSlaveHighPADissipation OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) High PA Dissipation"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 113 }

nxlinkV1x2StandaloneorSlaveSystemForwardPowerLow OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) System Forward Power Low"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 114 }

nxlinkV1x2StandaloneorSlaveExtendedRfLoss OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Extended Rf Loss"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 115 }

nxlinkV1x2StandaloneorSlaveIntakeTemperatureHigh OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Intake Temperature High"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 116 }

nxlinkV1x2StandaloneorSlaveExhaustTemperatureHigh OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Exhaust Temperature High"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 117 }

nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledShutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) This Transmitter Disabled: Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 118 }

nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledTiming OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) This Transmitter Disabled: Timing"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 119 }

nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) This Transmitter Disabled: Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 120 }

nxlinkV1x2StandaloneorSlaveThisTransmitterDisabledSystem OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) This Transmitter Disabled: System"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 121 }

nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledShutback OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Other Transmitter Disabled: Shutback"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 122 }

nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledTiming OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Other Transmitter Disabled: Timing"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 123 }

nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Other Transmitter Disabled: Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 124 }

nxlinkV1x2StandaloneorSlaveOtherTransmitterDisabledSystem OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Other Transmitter Disabled: System"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 125 }

nxlinkV1x2StandaloneorSlavePowerMeters OBJECT-TYPE
  SYNTAX EnumIncreaseDecrease
  MAX-ACCESS write-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Power Meters"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 126 }

nxlinkV1x2StandaloneorSlaveForwardPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Forward Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 127 }

nxlinkV1x2StandaloneorSlaveReflectedPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Reflected Power"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 128 }

nxlinkV1x2StandaloneorSlaveRFDrive OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) RF Drive"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 129 }

nxlinkV1x2StandaloneorSlavePAVDC OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PA VDC"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 130 }

nxlinkV1x2StandaloneorSlaveTotalPACurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Total PA Current"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 131 }

nxlinkV1x2StandaloneorSlaveEfficiencyDCtoRF OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Efficiency: DC to RF"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 132 }

nxlinkV1x2StandaloneorSlaveVSWR OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) VSWR"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 133 }

nxlinkV1x2StandaloneorSlaveControllerTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Controller Temperature"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 135 }

nxlinkV1x2StandaloneorSlaveRejectLoadTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Reject Load Temperature"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 136 }

nxlinkV1x2StandaloneorSlaveIntakeTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Intake Temperature"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 137 }

nxlinkV1x2StandaloneorSlaveExhaustTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Exhaust Temperature"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 138 }

nxlinkV1x2StandaloneorSlavePAFanASpeed OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PA Fan A Speed"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 139 }

nxlinkV1x2StandaloneorSlavePAFanBSpeed OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) PA Fan B Speed"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 140 }

nxlinkV1x2StandaloneorSlaveTemperatureRise OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Temperature Rise"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 141 }

nxlinkV1x2StandaloneorSlavePlus5V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +5V"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 143 }

nxlinkV1x2StandaloneorSlavePlus15V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +15V"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 144 }

nxlinkV1x2StandaloneorSlaveMinus15V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) -15V"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 145 }

nxlinkV1x2StandaloneorSlavePlus24V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +24V"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 146 }

nxlinkV1x2StandaloneorSlavePlus12V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) +12V"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 147 }

nxlinkV1x2StandaloneorSlaveQ1Current OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q1 Current"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 149 }

nxlinkV1x2StandaloneorSlaveQ2Current OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q2 Current"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 150 }

nxlinkV1x2StandaloneorSlaveQ3Current OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q3 Current"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 151 }

nxlinkV1x2StandaloneorSlaveQ4Current OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q4 Current"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 152 }

nxlinkV1x2StandaloneorSlaveQ1Bias OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q1 Bias"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 153 }

nxlinkV1x2StandaloneorSlaveQ2Bias OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q2 Bias"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 154 }

nxlinkV1x2StandaloneorSlaveQ3Bias OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q3 Bias"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 155 }

nxlinkV1x2StandaloneorSlaveQ4Bias OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "V1x2 (Standalone or Slave) Q4 Bias"
  ::= { nxlinkV1x2StandaloneorSlaveEntry 156 }

END