NAUTEL-SC1-MAIN-STANDBY-AM-2-NXLINK-MIB DEFINITIONS ::= BEGIN

IMPORTS
  OBJECT-TYPE     FROM RFC-1212
  TRAP-TYPE       FROM RFC-1215
  nxlink          FROM NAUTEL-NXLINK-MIB
;

EnumTrueFalse ::= INTEGER
{
  false (0), true (1)
}

EnumIncreaseDecrease ::= INTEGER
{
  decrease (0), increase (1)
}

EnumSC1MainStandbyAM2Incontactwithequipment ::= INTEGER
{
  no (0), yes (1)
}

EnumSC1MainStandbyAM2SystemControl ::= INTEGER
{
  local (0), remote (1)
}

EnumSC1MainStandbyAM2RFPower ::= INTEGER
{
  off (0), on (1)
}

EnumSC1MainStandbyAM2RFOk ::= INTEGER
{
  yes (0), no (1)
}

EnumSC1MainStandbyAM2PrimaryPowerSupply ::= INTEGER
{
  ac (0), txsupplieddc (1)
}

EnumSC1MainStandbyAM2StandbyTransmitter ::= INTEGER
{
  no (0), yes (1)
}

EnumSC1MainStandbyAM2StandbyTransmitterTestInProgress ::= INTEGER
{
  no (0), yes (1)
}

EnumSC1MainStandbyAM2AutomaticTransmitterChangeovers ::= INTEGER
{
  disabled (0), enabled (1)
}

EnumSC1MainStandbyAM2MainTransmitter ::= INTEGER
{
  a (0), b (1)
}

EnumSC1MainStandbyAM2ActiveTransmitter ::= INTEGER
{
  a (0), b (1)
}

--
-- Nx Device Table
--

NxLinkSC1MainStandbyAM2Entry ::= SEQUENCE
{
  nxlinkSC1MainStandbyAM2TableIndex                INTEGER,
  nxlinkSC1MainStandbyAM2DeviceId                  EnumDeviceId,
  nxlinkSC1MainStandbyAM2DeviceType                OCTET STRING,
  nxlinkSC1MainStandbyAM2DeviceDescription         OCTET STRING,
  nxlinkSC1MainStandbyAM2FirmwareVersion           OCTET STRING,
  nxlinkSC1MainStandbyAM2FirmwareDate              OCTET STRING,
  nxlinkSC1MainStandbyAM2Manufacturer              OCTET STRING,
  nxlinkSC1MainStandbyAM2Incontactwithequipment          EnumSC1MainStandbyAM2Incontactwithequipment,
  nxlinkSC1MainStandbyAM2SystemControl          EnumSC1MainStandbyAM2SystemControl,
  nxlinkSC1MainStandbyAM2RFPower          EnumSC1MainStandbyAM2RFPower,
  nxlinkSC1MainStandbyAM2RFOk          EnumSC1MainStandbyAM2RFOk,
  nxlinkSC1MainStandbyAM2MainNormalChangeoverThreshold          INTEGER,
  nxlinkSC1MainStandbyAM2GeneratorChangeoverThreshold          INTEGER,
  nxlinkSC1MainStandbyAM2MainNormalShutdownThreshold          INTEGER,
  nxlinkSC1MainStandbyAM2GeneratorShutdownThreshold          INTEGER,
  nxlinkSC1MainStandbyAM2ChangeoverDelay          INTEGER,
  nxlinkSC1MainStandbyAM2PrimaryPowerSupply          EnumSC1MainStandbyAM2PrimaryPowerSupply,
  nxlinkSC1MainStandbyAM2StandbyTransmitter          EnumSC1MainStandbyAM2StandbyTransmitter,
  nxlinkSC1MainStandbyAM2StandbyTransmitterTestInProgress          EnumSC1MainStandbyAM2StandbyTransmitterTestInProgress,
  nxlinkSC1MainStandbyAM2AutomaticTransmitterChangeovers          EnumSC1MainStandbyAM2AutomaticTransmitterChangeovers,
  nxlinkSC1MainStandbyAM2MainTransmitter          EnumSC1MainStandbyAM2MainTransmitter,
  nxlinkSC1MainStandbyAM2ActiveTransmitter          EnumSC1MainStandbyAM2ActiveTransmitter,
  nxlinkSC1MainStandbyAM2TransmitterAForwardPower          INTEGER,
  nxlinkSC1MainStandbyAM2TransmitterBForwardPower          INTEGER,
  nxlinkSC1MainStandbyAM2Plus152024VDC          INTEGER,
  nxlinkSC1MainStandbyAM2TransmitterADCSupply          INTEGER,
  nxlinkSC1MainStandbyAM2TransmitterBDCSupply          INTEGER,
  nxlinkSC1MainStandbyAM2Plus24V          INTEGER,
  nxlinkSC1MainStandbyAM2Plus15V          INTEGER,
  nxlinkSC1MainStandbyAM2Plus5V          INTEGER,
  nxlinkSC1MainStandbyAM2Plus33V          INTEGER,
  nxlinkSC1MainStandbyAM2Minus15V          INTEGER,
  nxlinkSC1MainStandbyAM2AmbientTemperature          INTEGER,
  nxlinkSC1MainStandbyAM2Fan1Speed          INTEGER,
  nxlinkSC1MainStandbyAM2Fan2Speed          INTEGER,
  nxlinkSC1MainStandbyAM2Fan3Speed          INTEGER,
  nxlinkSC1MainStandbyAM2ActiveFaults          INTEGER,
  nxlinkSC1MainStandbyAM2Alarm00          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm01          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2MainPowerFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2InterlockOpen          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm04          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm05          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm06          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm07          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2BatteryBackupLow          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm11          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm12          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm13          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm14          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2DummyLoadInterlockOpen          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm16          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm17          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2SwitchMalfunction          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2AutoChangeover          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm22          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2TransmitterASWRChangeoverInhibit          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2TransmitterBSWRChangeoverInhibit          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2ActiveTransmitterRFOff          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2ActiveTransmitterPowerShutdown          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2ActiveTransmitterReducedPower          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2StandbyTransmitterTest          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2NoReducedPowerAcknowledge          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm32          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm33          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2HighTemperature          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2LowForwardPowerTimeout          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2InletLouverClosed          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2OutletLouverClosed          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2GeneratorOnline          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm41          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm42          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2TransmitterAPSFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2TransmitterBPSFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Fan1Fail          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Fan2Fail          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Fan3Fail          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2RemoteInterfaceCommunicationFailure          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm51          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2StatusRestoreFail          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2EEPROMFailPowerPresets          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2EEPROMFailMeterPresets          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2EEPROMFailMeterCalibration          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2EEPROMFailThresholds          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm57          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Plus5VSupplyFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm61          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm62          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Alarm63          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Plus24VSupplyFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Plus33VSupplyFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Minus15VSupplyFault          EnumTrueFalse,
  nxlinkSC1MainStandbyAM2Plus15VSupplyFault          EnumTrueFalse
}

nxlinkSC1MainStandbyAM2Table OBJECT-TYPE
  SYNTAX SEQUENCE OF NxLinkSC1MainStandbyAM2Entry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
  "Table for SC1 Main-Standby AM 2 devices"
  ::= {nxlink 10340 }

nxlinkSC1MainStandbyAM2Entry OBJECT-TYPE
  SYNTAX NxLinkSC1MainStandbyAM2Entry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 device entry in the SC1 Main-Standby AM 2 table"
  INDEX { nxlinkSC1MainStandbyAM2TableIndex }
  ::= { nxlinkSC1MainStandbyAM2Table 1 }

nxlinkSC1MainStandbyAM2TableIndex OBJECT-TYPE
  SYNTAX INTEGER (1..7)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Index value of SC1 Main-Standby AM 2 device:
  1 = Primary Device
  2-7 = Sub-devices"
  ::= { nxlinkSC1MainStandbyAM2Entry 1 }

nxlinkSC1MainStandbyAM2DeviceId OBJECT-TYPE
  SYNTAX EnumDeviceId
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device identifier"
  ::= { nxlinkSC1MainStandbyAM2Entry 2 }

nxlinkSC1MainStandbyAM2DeviceType OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device type"
  ::= { nxlinkSC1MainStandbyAM2Entry 3 }

nxlinkSC1MainStandbyAM2DeviceDescription OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Device description"
  ::= { nxlinkSC1MainStandbyAM2Entry 4 }

nxlinkSC1MainStandbyAM2FirmwareVersion OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Firmware version"
  ::= { nxlinkSC1MainStandbyAM2Entry 5 }

nxlinkSC1MainStandbyAM2FirmwareDate OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Firmware date"
  ::= { nxlinkSC1MainStandbyAM2Entry 6 }

nxlinkSC1MainStandbyAM2Manufacturer OBJECT-TYPE
  SYNTAX OCTET STRING (SIZE(0..255))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "Manufacturer"
  ::= { nxlinkSC1MainStandbyAM2Entry 7 }

nxlinkSC1MainStandbyAM2Incontactwithequipment OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2Incontactwithequipment
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 In contact with equipment"
  ::= { nxlinkSC1MainStandbyAM2Entry 8 }

nxlinkSC1MainStandbyAM2SystemControl OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2SystemControl
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 System Control"
  ::= { nxlinkSC1MainStandbyAM2Entry 9 }

nxlinkSC1MainStandbyAM2RFPower OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2RFPower
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 RF Power"
  ::= { nxlinkSC1MainStandbyAM2Entry 10 }

nxlinkSC1MainStandbyAM2RFOk OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2RFOk
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 RF Ok"
  ::= { nxlinkSC1MainStandbyAM2Entry 11 }

nxlinkSC1MainStandbyAM2MainNormalChangeoverThreshold OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Main (Normal) Changeover Threshold (0.1 kW)"
  ::= { nxlinkSC1MainStandbyAM2Entry 12 }

nxlinkSC1MainStandbyAM2GeneratorChangeoverThreshold OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Generator Changeover Threshold (0.1 kW)"
  ::= { nxlinkSC1MainStandbyAM2Entry 13 }

nxlinkSC1MainStandbyAM2MainNormalShutdownThreshold OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Main (Normal) Shutdown Threshold (0.1 kW)"
  ::= { nxlinkSC1MainStandbyAM2Entry 14 }

nxlinkSC1MainStandbyAM2GeneratorShutdownThreshold OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Generator Shutdown Threshold (0.1 kW)"
  ::= { nxlinkSC1MainStandbyAM2Entry 15 }

nxlinkSC1MainStandbyAM2ChangeoverDelay OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Changeover Delay (s)"
  ::= { nxlinkSC1MainStandbyAM2Entry 16 }

nxlinkSC1MainStandbyAM2PrimaryPowerSupply OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2PrimaryPowerSupply
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Primary Power Supply"
  ::= { nxlinkSC1MainStandbyAM2Entry 17 }

nxlinkSC1MainStandbyAM2StandbyTransmitter OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2StandbyTransmitter
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Standby Transmitter"
  ::= { nxlinkSC1MainStandbyAM2Entry 18 }

nxlinkSC1MainStandbyAM2StandbyTransmitterTestInProgress OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2StandbyTransmitterTestInProgress
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Standby Transmitter Test In Progress"
  ::= { nxlinkSC1MainStandbyAM2Entry 19 }

nxlinkSC1MainStandbyAM2AutomaticTransmitterChangeovers OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2AutomaticTransmitterChangeovers
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Automatic Transmitter Changeovers"
  ::= { nxlinkSC1MainStandbyAM2Entry 20 }

nxlinkSC1MainStandbyAM2MainTransmitter OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2MainTransmitter
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Main Transmitter"
  ::= { nxlinkSC1MainStandbyAM2Entry 21 }

nxlinkSC1MainStandbyAM2ActiveTransmitter OBJECT-TYPE
  SYNTAX EnumSC1MainStandbyAM2ActiveTransmitter
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Active Transmitter"
  ::= { nxlinkSC1MainStandbyAM2Entry 22 }

nxlinkSC1MainStandbyAM2TransmitterAForwardPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter A Forward Power"
  ::= { nxlinkSC1MainStandbyAM2Entry 24 }

nxlinkSC1MainStandbyAM2TransmitterBForwardPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter B Forward Power"
  ::= { nxlinkSC1MainStandbyAM2Entry 25 }

nxlinkSC1MainStandbyAM2Plus152024VDC OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +15/20/24 VDC"
  ::= { nxlinkSC1MainStandbyAM2Entry 26 }

nxlinkSC1MainStandbyAM2TransmitterADCSupply OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter A DC Supply"
  ::= { nxlinkSC1MainStandbyAM2Entry 27 }

nxlinkSC1MainStandbyAM2TransmitterBDCSupply OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter B DC Supply"
  ::= { nxlinkSC1MainStandbyAM2Entry 28 }

nxlinkSC1MainStandbyAM2Plus24V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +24V"
  ::= { nxlinkSC1MainStandbyAM2Entry 29 }

nxlinkSC1MainStandbyAM2Plus15V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +15V"
  ::= { nxlinkSC1MainStandbyAM2Entry 30 }

nxlinkSC1MainStandbyAM2Plus5V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +5V"
  ::= { nxlinkSC1MainStandbyAM2Entry 31 }

nxlinkSC1MainStandbyAM2Plus33V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +3.3V"
  ::= { nxlinkSC1MainStandbyAM2Entry 32 }

nxlinkSC1MainStandbyAM2Minus15V OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 -15V"
  ::= { nxlinkSC1MainStandbyAM2Entry 33 }

nxlinkSC1MainStandbyAM2AmbientTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Ambient Temperature"
  ::= { nxlinkSC1MainStandbyAM2Entry 34 }

nxlinkSC1MainStandbyAM2Fan1Speed OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 1 Speed"
  ::= { nxlinkSC1MainStandbyAM2Entry 35 }

nxlinkSC1MainStandbyAM2Fan2Speed OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 2 Speed"
  ::= { nxlinkSC1MainStandbyAM2Entry 36 }

nxlinkSC1MainStandbyAM2Fan3Speed OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 3 Speed"
  ::= { nxlinkSC1MainStandbyAM2Entry 37 }

nxlinkSC1MainStandbyAM2ActiveFaults OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS write-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Active Faults"
  ::= { nxlinkSC1MainStandbyAM2Entry 38 }

nxlinkSC1MainStandbyAM2Alarm00 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_0"
  ::= { nxlinkSC1MainStandbyAM2Entry 39 }

nxlinkSC1MainStandbyAM2Alarm01 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_1"
  ::= { nxlinkSC1MainStandbyAM2Entry 40 }

nxlinkSC1MainStandbyAM2MainPowerFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Main Power Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 41 }

nxlinkSC1MainStandbyAM2InterlockOpen OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Interlock Open"
  ::= { nxlinkSC1MainStandbyAM2Entry 42 }

nxlinkSC1MainStandbyAM2Alarm04 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_4"
  ::= { nxlinkSC1MainStandbyAM2Entry 43 }

nxlinkSC1MainStandbyAM2Alarm05 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_5"
  ::= { nxlinkSC1MainStandbyAM2Entry 44 }

nxlinkSC1MainStandbyAM2Alarm06 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_6"
  ::= { nxlinkSC1MainStandbyAM2Entry 45 }

nxlinkSC1MainStandbyAM2Alarm07 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 0_7"
  ::= { nxlinkSC1MainStandbyAM2Entry 46 }

nxlinkSC1MainStandbyAM2BatteryBackupLow OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Battery Backup Low"
  ::= { nxlinkSC1MainStandbyAM2Entry 47 }

nxlinkSC1MainStandbyAM2Alarm11 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_1"
  ::= { nxlinkSC1MainStandbyAM2Entry 48 }

nxlinkSC1MainStandbyAM2Alarm12 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_2"
  ::= { nxlinkSC1MainStandbyAM2Entry 49 }

nxlinkSC1MainStandbyAM2Alarm13 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_3"
  ::= { nxlinkSC1MainStandbyAM2Entry 50 }

nxlinkSC1MainStandbyAM2Alarm14 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_4"
  ::= { nxlinkSC1MainStandbyAM2Entry 51 }

nxlinkSC1MainStandbyAM2DummyLoadInterlockOpen OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Dummy Load Interlock Open"
  ::= { nxlinkSC1MainStandbyAM2Entry 52 }

nxlinkSC1MainStandbyAM2Alarm16 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_6"
  ::= { nxlinkSC1MainStandbyAM2Entry 53 }

nxlinkSC1MainStandbyAM2Alarm17 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 1_7"
  ::= { nxlinkSC1MainStandbyAM2Entry 54 }

nxlinkSC1MainStandbyAM2SwitchMalfunction OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Switch Malfunction"
  ::= { nxlinkSC1MainStandbyAM2Entry 55 }

nxlinkSC1MainStandbyAM2AutoChangeover OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Auto Changeover"
  ::= { nxlinkSC1MainStandbyAM2Entry 56 }

nxlinkSC1MainStandbyAM2Alarm22 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 2_2"
  ::= { nxlinkSC1MainStandbyAM2Entry 57 }

nxlinkSC1MainStandbyAM2TransmitterASWRChangeoverInhibit OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter A SWR Changeover Inhibit"
  ::= { nxlinkSC1MainStandbyAM2Entry 58 }

nxlinkSC1MainStandbyAM2TransmitterBSWRChangeoverInhibit OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter B SWR Changeover Inhibit"
  ::= { nxlinkSC1MainStandbyAM2Entry 59 }

nxlinkSC1MainStandbyAM2ActiveTransmitterRFOff OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Active Transmitter RF Off"
  ::= { nxlinkSC1MainStandbyAM2Entry 60 }

nxlinkSC1MainStandbyAM2ActiveTransmitterPowerShutdown OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Active Transmitter Power Shutdown"
  ::= { nxlinkSC1MainStandbyAM2Entry 61 }

nxlinkSC1MainStandbyAM2ActiveTransmitterReducedPower OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Active Transmitter Reduced Power"
  ::= { nxlinkSC1MainStandbyAM2Entry 62 }

nxlinkSC1MainStandbyAM2StandbyTransmitterTest OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Standby Transmitter Test"
  ::= { nxlinkSC1MainStandbyAM2Entry 63 }

nxlinkSC1MainStandbyAM2NoReducedPowerAcknowledge OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 No Reduced Power Acknowledge"
  ::= { nxlinkSC1MainStandbyAM2Entry 64 }

nxlinkSC1MainStandbyAM2Alarm32 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 3_2"
  ::= { nxlinkSC1MainStandbyAM2Entry 65 }

nxlinkSC1MainStandbyAM2Alarm33 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 3_3"
  ::= { nxlinkSC1MainStandbyAM2Entry 66 }

nxlinkSC1MainStandbyAM2HighTemperature OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 High Temperature"
  ::= { nxlinkSC1MainStandbyAM2Entry 67 }

nxlinkSC1MainStandbyAM2LowForwardPowerTimeout OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Low Forward Power Timeout"
  ::= { nxlinkSC1MainStandbyAM2Entry 68 }

nxlinkSC1MainStandbyAM2InletLouverClosed OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Inlet Louver Closed"
  ::= { nxlinkSC1MainStandbyAM2Entry 69 }

nxlinkSC1MainStandbyAM2OutletLouverClosed OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Outlet Louver Closed"
  ::= { nxlinkSC1MainStandbyAM2Entry 70 }

nxlinkSC1MainStandbyAM2GeneratorOnline OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Generator Online"
  ::= { nxlinkSC1MainStandbyAM2Entry 71 }

nxlinkSC1MainStandbyAM2Alarm41 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 4_1"
  ::= { nxlinkSC1MainStandbyAM2Entry 72 }

nxlinkSC1MainStandbyAM2Alarm42 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 4_2"
  ::= { nxlinkSC1MainStandbyAM2Entry 73 }

nxlinkSC1MainStandbyAM2TransmitterAPSFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter A P/S Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 74 }

nxlinkSC1MainStandbyAM2TransmitterBPSFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Transmitter B P/S Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 75 }

nxlinkSC1MainStandbyAM2Fan1Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 1 Fail"
  ::= { nxlinkSC1MainStandbyAM2Entry 76 }

nxlinkSC1MainStandbyAM2Fan2Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 2 Fail"
  ::= { nxlinkSC1MainStandbyAM2Entry 77 }

nxlinkSC1MainStandbyAM2Fan3Fail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Fan 3 Fail"
  ::= { nxlinkSC1MainStandbyAM2Entry 78 }

nxlinkSC1MainStandbyAM2RemoteInterfaceCommunicationFailure OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Remote Interface Communication Failure"
  ::= { nxlinkSC1MainStandbyAM2Entry 79 }

nxlinkSC1MainStandbyAM2Alarm51 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 5_1"
  ::= { nxlinkSC1MainStandbyAM2Entry 80 }

nxlinkSC1MainStandbyAM2StatusRestoreFail OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Status Restore Fail"
  ::= { nxlinkSC1MainStandbyAM2Entry 81 }

nxlinkSC1MainStandbyAM2EEPROMFailPowerPresets OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 EEPROM Fail: Power Presets"
  ::= { nxlinkSC1MainStandbyAM2Entry 82 }

nxlinkSC1MainStandbyAM2EEPROMFailMeterPresets OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 EEPROM Fail: Meter Presets"
  ::= { nxlinkSC1MainStandbyAM2Entry 83 }

nxlinkSC1MainStandbyAM2EEPROMFailMeterCalibration OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 EEPROM Fail: Meter Calibration"
  ::= { nxlinkSC1MainStandbyAM2Entry 84 }

nxlinkSC1MainStandbyAM2EEPROMFailThresholds OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 EEPROM Fail: Thresholds"
  ::= { nxlinkSC1MainStandbyAM2Entry 85 }

nxlinkSC1MainStandbyAM2Alarm57 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 5_7"
  ::= { nxlinkSC1MainStandbyAM2Entry 86 }

nxlinkSC1MainStandbyAM2Plus5VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +5V Supply Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 87 }

nxlinkSC1MainStandbyAM2Alarm61 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 6_1"
  ::= { nxlinkSC1MainStandbyAM2Entry 88 }

nxlinkSC1MainStandbyAM2Alarm62 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 6_2"
  ::= { nxlinkSC1MainStandbyAM2Entry 89 }

nxlinkSC1MainStandbyAM2Alarm63 OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 Alarm 6_3"
  ::= { nxlinkSC1MainStandbyAM2Entry 90 }

nxlinkSC1MainStandbyAM2Plus24VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +24V Supply Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 91 }

nxlinkSC1MainStandbyAM2Plus33VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +3.3V Supply Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 92 }

nxlinkSC1MainStandbyAM2Minus15VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 -15V Supply Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 93 }

nxlinkSC1MainStandbyAM2Plus15VSupplyFault OBJECT-TYPE
  SYNTAX EnumTrueFalse
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
  "SC1 Main-Standby AM 2 +15V Supply Fault"
  ::= { nxlinkSC1MainStandbyAM2Entry 94 }

END